PACSgear Enterprise Server product requirements
The minimum hardware and software requirements (or their virtual machine equivalents) are provided in the following table.
| Specification | Description |
|---|---|
| Operating systems | Windows Server 2019 R2 and later |
| Processor | Xeon, 4 cores, 2 GHz |
| Memory | 8 GB |
| Hard disk | 250 GB |
| Network interface | 100 MB/1 GB, static MAC address |
| Display | 1024 x 768, 32-bit color |
| SQL |
Microsoft SQL Server 2019 or later For base installation we recommend 10 GB SQL Server hard drive allocation for each PACSgear Enterprise Server. |
PACSgear Enterprise Server setup program requirements
The following table provides setup program requirements for PACSgear Enterprise Server by operating system.
| I/O | Connectors and Adapters |
|---|---|
| Windows Server 2019 |
|
| Windows Server 2022 |
|
Virtual host requirements
The minimum virtual host requirements are provided in the following table.
| Specification | Description |
|---|---|
| Virtual processors | 8 vCPU, 1.8 GHz |
| Memory | 8 GB |
| Hard disk | 1 GB free space |
| Network interface | 100 MB/1 GB, static MAC address |
Client requirements
The minimum hardware and operating system requirements are provided in the following table.
| Specification | Description |
|---|---|
| Operating Systems | Windows 10 and 11 |
| Memory | 4 GB |
| Internet Browser |
|
PACS Scan Web specifications
- PACS Scan Web supports scanner resolutions of 150, 200, 300, 400, and 600.
- Maximum number of DICOM files per upload: 500
OnBase specifications
- OnBase 17.0.1 (Build 75) or higher.
- Supports sending of only the following video format to OnBase: MPEG4 from the MDR Video Touch or PACS Scan Mobile.
Antivirus exclusion recommendation
This application supports passive antivirus scans. You must ensure that passive scanning of the server conforms to the security policy at the installation site. Real-time scanning is allowed, but you must configure the antivirus program to exclude the following folders.
- C:\Program Files\PACSgear\PACSGEAR Core Server\config
- C:\Program Files\PACSgear\PACSGEAR Core Server\dicomfiles
- C:\Program Files\PACSgear\PACSGEAR Core Server\jobs
- C:\Program Files\PACSgear\PACSGEAR Core Server\logs
- C:\Program Files\PACSgear\PACSGEAR Core Server\PGAPPS
- C:\Program Files\PACSgear\PACSGEAR Core Server\rawcap
- C:\Program Files\PACSgear\PG ScannerNote: You must configure the folder exclusion for PG Scanner on both the server and client machines.
Port settings
PACSgear Enterprise Server, depending on its configuration, may use several TCP/IP ports in the host computer's firewall. This can include the following ports.
- The default DICOM Modality Worklist port for Image Link is 104.
- The default Image Link HL7 listening port for ingesting HL7 messages is 5100.
- The default Encounter Manager listening port is 5555.
- The PG Scanner service on the client uses 5050 and 8555.
- The default EGHR port is 6500.
- The HTTP/HTTPS Web interface defaults are 80 and 443 respectively.
- The Server needs port 6000 as the default server access point.
- The default MDR Link port is 7070.
You can configure and add additional ports for these services to the system’s firewall exceptions.
Windows patches and updates
Installation of all standard Microsoft security patches and updates on the system is supported unless otherwise stated by a Hyland representative.