Appendix A: inserverOutput.ini - Appendix A: inserverOutput.ini - The following table provides definitions and sample data for the settings in the inserverOutput.ini configuration file. This table displays the INI settings under group headings in brackets, for example, [Remote] , in the order the groups appear in the INI file. Each setting offers two or more options, which are defined in the table below along with a description of each setting and its options. Use this table as a guide when customizing the file. - Perceptive Content - Output Agent Installation and Setup Guide for Windows - Perceptive-Content/Output-Agent-Installation-and-Setup-Guide-for-Windows/Foundation-26.1/Output-Agent-Installation-and-Setup-Guide-for-Windows/Appendix-A-inserverOutput.ini - Foundation 26.1 - Foundation 26.1

Output Agent Installation and Setup Guide for Windows

Platform
Perceptive Content
Product
Output Agent Installation and Setup Guide for Windows
Release
Foundation 26.1
License
ft:lastPublication
2026-10-27T22:46:01.279034
ft:locale
en-US

The following table provides definitions and sample data for the settings in the inserverOutput.ini configuration file. This table displays the INI settings under group headings in brackets, for example, [Remote], in the order the groups appear in the INI file. Each setting offers two or more options, which are defined in the table below along with a description of each setting and its options. Use this table as a guide when customizing the file.

Group Setting Options Description
Remote server.ip.address Any valid IP address

Specifies the IP address of Perceptive Content Server.

The default is specified during installation.

Remote server.ip.port Any existing port number

Specifies the port number of Perceptive Content Server.

The default is specified during installation.

Remote reconnect.interval Any positive integer

Specifies how many seconds Output Agent waits before attempting to reconnect to Perceptive Content Server after a lost connection.

Note: Do not change this value without first consulting Product Support.

The default is 60.

Remote authentication.token Any valid token. Specifies the authentication token to use for authentication with Perceptive Content Server. This value will be encrypted and removed from the setting after running the inserverOutput -encrypt-config command.
Remote authentication.token.encrypted Any valid token. Indicates the encrypted agent authentication token. The agent authentication token is specified in the authentication.token setting and can be encrypted by running the inserverOutput -encrypt-config command. This command should be run each time the agent authentication token is updated. Do not manually update this setting.
Documents search.maxresults Any positive integer

Specifies the maximum number of results Output Agent outputs.

The default is 250000.

Note:

This setting is only applicable if search.sql is set to TRUE.

The odbc.grid.max.fetch.count setting in the inow.ini file for Perceptive Content Server can also limit the results.

Documents search.sql

TRUE

FALSE

Specifies whether sql or vsl is used for queries.

If set to FALSE, then search.maxresults does not have an effect.

If vsl is used the odbc.grid.max.fetch.count is used. This setting has a hard coded max of 10000.

The default is FALSE.

Monitor poll.interval Any positive integer

Specifies how often, in seconds, Output Agent searches the directory specified for the monitor.path setting for new output keyfiles.

The default is 15.

Note: Do not change this value without first consulting Product Support.
Monitor monitor.path Any valid directory

Specifies the path to the directory where Output Agent checks for new outputkeyfiles.

The default is $(IMAGENOWDIR6)\output_agent\monitor.

Monitor monitor.extension Any valid file extension

Specifies the file extension that Output Agent uses to check for output keyfiles.

The default is txt.

General keyfile.delete

TRUE

FALSE

Specifies whether Output Agent deletes the keyfile from the monitor directory after it runs a query.

TRUE = Delete the keyfile.

FALSE = Do not delete the keyfile.

The default is TRUE.

General keyfile.move

TRUE

FALSE

Specifies whether Output Agent moves the keyfile after it runs a query.

TRUE = Move the keyfile to the directory specified for the keyfile.move.path setting.

FALSE = Do not move the keyfile.

The default is TRUE.

Note: If set to TRUE, keyfile.move.path is required.
General keyfile.move.path Any valid directory

Specifies the directory that Output Agent uses to store executed keyfiles.

The default is $(IMAGENOWDIR6)\output_agent\moved.

Note: If keyfile.move is set to TRUE, this setting is required.
General keyfile.encoding

ANSI

UTF-8

Specifies the expected keyfile encoding.

The default is ANSI.

General output.mode

CLIENTVIEW

DICOM

EXPORT

PRINTER

Specifies the output mode that Output Agent uses. To see which settings Clientview uses, refer to the [Layout] and [Export] groups in this table. Clientview is only available on Windows.

The default is <none>.

General output.incomplete.mailto Any text string

Specifies the email address that receives notifications when page rendering or any other output process does not complete.

The default is blank.

Note: Using a comma-delimited list, you can specify multiple email addresses.
Layout layout.dpi.max DPI

Specifies the resolution, in dots-per-inch (DPI), that Output Agent uses for output sheets. Clientview output mode ignores this setting.

The default is 300.

Layout layout.units

IMPERIAL

METRIC

PIXELS

Specifies the unit of measurement that Output Agent uses. Clientview output mode overrides this setting to PIXELS.

IMPERIAL = Inches

METRIC = Millimeters

PIXELS = Pixels

The default is IMPERIAL.

Layout layout.margin Any range in the unit specified for the layout.units setting

Specifies the margin space that Output Agent uses for output sheets. Clientview output mode ignores this setting.

The default is 0.

Note: The layouts.units setting determines the unit of measurement used for the margin space.
Layout layout.annotations.show

TRUE

FALSE

Specifies whether Output Agent includes annotations on output sheets.

The default is TRUE.

Layout layout.pages.per.sheet Any positive integer

Specifies the number of pages that Output Agent outputs per sheet. Clientview output mode ignores this setting.

The default is 1.

Layout layout.pages.per.sheet.spacing Any range in the unit specified for thelayout.units setting

Specifies the spacing that Output Agent uses between output sheets. Clientview output mode ignores this setting.

The default is 0.25.

Note: The layouts.units setting determines the unit of measure used for the spacing.
Layout layout.pages.per.row Any positive integer

Specifies the number of pages per row that Output Agent uses for each output sheet. Clientview output mode ignores this setting.

The default is 1.

Layout layout.width Any range in the unit specified for the layout.units setting

Specifies the width that Output Agent uses for output sheets. Clientview output mode ignores this setting.

The default is 8.5.

Note: The layouts.units setting determines the unit of measure used for the width.
Layout layout.height Any range in the unit specified for the layout.units setting

Specifies the height that Output Agent uses for output sheets. Clientview output mode ignores this setting.

The default is 11.

Note: The layouts.units setting determines the unit of measure used for the height.
Layout layout.color.depth Any positive integer representing bits

Specifies the color depth, in bits per pixel, that Output Agent uses for output sheets. Clientview output mode ignores this setting.

The default is 24.

Layout layout.color.mode

COLOR

GRAYSCALE

Specifies whether Output Agent uses color or grayscale for output sheets. Clientview output mode ignores this setting.

The default is COLOR.

Layout layout.header Any text string Specifies the header Output Agent includes at the top of each output sheet.
Tip: You can use document keys or properties as the header by enclosing column headings in brackets. For example, “[DRAWER] [PAGE]” displays the drawer value and the page number at the top of each page.
Dicom dicom.ip Any valid IP address Specifies the IP address of the Dicom server where Output Agent exports files.
Dicom dicom.port Any valid port ID

Specifies the service port of the Dicom server where Output Agent exports files.

The default is 104.

Dicom dicom.store.title Any text string Specifies the store title for output files that Output Agent sends to the Dicom server.
Dicom dicom.external.title Any text string Specifies the external title for output files that Output Agent sends to the Dicom server.
Dicom dicom.tag.<x> = <pos1>^<pos2>^<doc key> See description

Specifies the Perceptive Content values you want to assign to Dicom tags.

Where <x> = A number from 1 to n.

Where <pos1> and <pos2> = The Dicom tag value, such as 0x0010^0x0020.

For example, the Dicom tag value 0x0010^0x0010 = PatientsName.

For example, the Dicom tag value 0x0010^0x0020 = PatientID.

Where <doc key> = One of the following options: [DOCID],[DOCNAME], [DRAWER], [FIELD1], [FIELD2], [FIELD3], [FIELD4], [FIELD5], or [DOCTYPE].

For example, dicom.tag.1 = 0x0010^0x0010^[FIELD1].

For example, dicom.tag.2 = 0x0010^0x0020^[FIELD5].

Export export.file.type

The following file formats are most commonly used:

2

3

6

10

11

17

27

29

75

87

146

147

149

150

Specifies the file type that Output Agent uses for exported files. The following file formats are most commonly used:

2 = GIF

3 = TIFF

6 = Windows BMP

10 = JPEG

75 = PNG

11 = TIFF with JPEG compression

17 = TIFF with LZW compression

27 = TIFF with G3 compression

29 = TIFF with G4 compression

87 = TIFF with RLE compression

146 = Raster PDF uncompressed

147 = Raster PDF with G3 compression

149 = Raster PDF with G4 compression

150 = Raster PDF with JPEG compression

The default is 17.

Export export.file.extension

The following file extensions are most commonly used:

GIF

BMP

JPG

PDF

PNG

TIFF

Specifies the file extension that Output Agent uses for exported files.

The default is TIFF.

Export export.file.directory Any valid directory

Specifies the directory that Output Agent uses to store exported files.

The default is $(IMAGENOWDIR6)\output_agent\export.

Export export.filename.format Any valid text string or the variables listed in Appendix B, “Variables to Create Export File Names.”

Specifies the naming scheme that Output Agent uses for exported files. You can define one or more variables and choose to include text for Perceptive Content to generate the file name of an exported file. Enclose variables in brackets. You can separate text and variables with underscores (such as [DOCID]_Page_Number_[PAGENUM]) to make the file names easier to read. You can also specify the width of some variables (such as [%0<a positive integer>PAGENUM]). Defining the variable width helps you organize files after you export multiple files. For more information, refer to the Appendix B section of this document.

The default is OutputAgent_[DOCID]_[PAGENUM].

Export export.multipage.document

TRUE

FALSE

Specifies whether Output Agent appends exported files when export.filename.format matches an existing file name.

TRUE = Append exported files to existing files.

FALSE = Do not append exported files.

The default is FALSE.

Export export.file.dpi Any positive integer

Specifies the dots-per-inch (DPI) that Output Agent uses for exported files. Clientview output mode ignores this setting.

The default is 150.

Printer printer.input.tray Varies depending on your printer settings

Specifies the input tray that Output Agent uses to print output sheets.

The default is 0.

Printer printer.name Any valid available printer

Specifies the name of the printer that Output Agent uses to print output sheets.

Refer to your Windows Printer Settings.

Printer printer.driver Any valid printer driver

Specifies the printer’s driver name that Output Agent uses to print output sheets.

Refer to your Windows Printer Settings.

The default is winspool.

Printer printer.downscale.color.mode

0

1

2

Specifies the color mode that Output Agent uses to print output sheets.

0 = Use the printer’s default setting.

1 = Black and white halftone.

2 = Black and white diffuse.

The default is 0.

Note: If set to 2, specify a threshold in printer.diffuse.black.level.threshold.
Printer printer.diffuse.black.level.threshold Any integer between 0 and 255

Specifies the threshold at which a given color in an output file is determined to be black or white.

The default is 128.

Note: If printer.downscale.color.mode is set to 2, this setting is required.
Printer printer.rotate.to.best.fit

TRUE

FALSE

Specifies whether the system automatically rotates a page image when the page orientation does not match the sheet orientation when printed.

TRUE = Rotate page image to match sheet orientation.

FALSE = Do not rotate page image to match sheet orientation when printed.

The default is FALSE.

Logging debug.level.file 0, 1-6, 9

Specifies the level that Output Agent uses to log errors for troubleshooting.

0 = Turn off logging.

1 = Use the least verbose logging.

6 = Use the most verbose logging.

9 = Turn on logging for timing. This logging shows the amount of time Output Agent uses to execute calls such as queries from the server to the database and for image conversions.

The default is 0.

Logging debug.level.pipe 0, 1-3, 6

Specifies the level that Output Agent uses to log pipe errors for troubleshooting.

0 = Turn off logging.

1 = Use the least verbose logging.

6 = Use the most verbose logging.

The default is 0.

Logging socket.level.file

1

0

Specifies whether to log communication between Perceptive Content Server and Output Agent.

1 = Log communication.

0 = Do not log communication.

The default is 0.